Pipes and fittings
Problem: Heat released into the surroundings and shapes that are difficult to insulate.
Effect: Lower surface temperature and reduced transmission losses.
Industry and district heating
Reduce heat losses while retaining access to the installation.
IzolPLUS solutions insulate pipes, fittings, heat substations and industrial building envelopes. Termo Stop follows complex shapes, while the thin layer keeps components accessible for inspection.
5 application groups shown below industrial solution range
4 stages from site data to verification technical cooperation process
Measured verification scope agreed before work method and report defined in the offer
Application matrix
Coatings for industrial installations and building envelopes.
Each row connects an operating problem with the appropriate product and function. One solution is not presented as the answer to every situation.
Heat substations
Problem: Hot valves, flanges and joints that require regular access.
Effect: Insulation that follows the geometry of each component.
Industrial roofs
Problem: Strong solar heat gain and an ageing existing roof layer.
Effect: Reflection of thermal radiation and renewal of the roof surface.
Walls and facades
Problem: Summer heat gain and energy losses during the heating season.
Effect: Additional thermal protection without changing the building form.
Tanks and equipment
Problem: Hot surfaces with irregular geometry.
Effect: A continuous layer on surfaces that still require service access.
Installation access
Termo Stop follows the component geometry.
Termo Stop covers pipes, valves, flanges and surfaces where a rigid enclosure could complicate inspection. The component remains accessible for visual checks after application.
- 01Less enclosure
A continuous layer follows the shape instead of building a rigid box around it.
- 02Planning around operations
Application on an operating installation requires a technical assessment of temperature and health and safety conditions.
- 03Visual access
The coating preserves the component geometry, supporting later surface inspections.
Measurement from a completed project
We report the result together with its measurement conditions.
A public example from an industrial roof compares two areas of the same roof at the same moment.
View the industrial roof projectAAM Driveline / 5 June 2023 / air temperature 23°C / Testo 872s
Roof coated with Bitum17-21°C
Uncoated area63°C
The readings describe this site and these measurement conditions. They are not a universal temperature promise.
Technical documents
Material for technical assessment, tendering and health and safety review.
We assemble the document set for the specified product and application. Every document retains the scope defined by its issuer.
NRO C-s1-d0
Classification to PN-EN 13501-1 for the products covered by the document.
Request the documentPZH for Termo-Wnętrze
The certificate also covers use in healthcare facilities.
Request the documentCE declaration
The document defines the IzolPLUS products covered by the declaration.
Request the documentTechnical data sheets
Parameters, substrate preparation and application conditions for the selected product.
Request current data sheetsCooperation process
From installation data to an agreed verification method.
A final report is useful only when the measurement method is agreed before work begins.
Site review and measurement
We collect data about the installation, medium, surface and operating conditions.
Technical proposal
We define the product, application scope and method for evaluating the result.
Application
Work is completed by a team prepared for the selected system and site conditions.
Final measurement
The measurement and reporting scope is agreed in the offer before work starts.
Industrial scope
One system family for installations and industrial buildings.
The product changes with the surface: Termo Stop for complex hot components, Bitum for roofs and Termo-Fasada for external walls.
District heating infrastructure
Pipes, valves, fittings and heat substations.
Production buildings
Roofs and facades exposed to demanding operating conditions.
Cold rooms and process areas
Surfaces assessed against the required temperature and operating conditions.
Technical documentation
Product data and measurement scope selected for the project.
Pytania i odpowiedzi
Technical questions about industrial applications
Odpowiedzi zachowują zakres właściwy dla konkretnej powierzchni, produktu i warunków zastosowania.
01What operating temperatures can Termo Stop accommodate?+
The acceptable range depends on the product configuration, substrate and operating conditions. We confirm it against the current technical data and the installation parameters.
02Can the coating be applied while an installation is operating?+
This may be possible after assessing surface temperature, health and safety requirements, and the application conditions of the selected product.
03Does the coating obstruct later inspection of fittings?+
The thin layer preserves the shape of the component and visual access to its surface. Preparation for inspection depends on the installation design.
04How is the system renewed?+
After assessing the surface, the system can be renewed with a further coat rather than removing the entire previous layer.
05Can application be carried out in winter?+
The conditions in the current technical data sheet, substrate temperature and the work environment determine whether application is possible.
06How can the solution affect operator safety?+
Reducing the external surface temperature can reduce the risk associated with accidental contact. The required level is defined using measurements and the site health and safety procedures.
Technical assessment
Send us the installation parameters for review.
From the technical data, we will determine the possible application scope, required documents and a suitable way to measure the result.