Reflects radiation
IzolPLUS coatings reflect 90-93% of thermal radiation.
Thermal insulation coatings
Millimetres of thermal insulation for demanding surfaces.
IzolPLUS is a coating system for roofs, facades, interiors and hot installations. It upgrades existing surfaces and complements the thermal protection of new building envelopes without adding a thick layer.
90-93% thermal radiation reflected public product data 07.2026
0.00079 W/(m·K) - tested coating Energies 2022
6 products in the IzolPLUS system product range 2026
Thin layer, measurable performance
Limit heat gain without making the building envelope thicker.
Conventional insulation limits heat conduction. IzolPLUS also acts on radiation at the surface and reflects 90-93% of thermal radiation.
On many roofs, the coating can be applied without removing the existing covering. On facades, it can preserve the building form and architectural details.
IzolPLUS can work as a refurbishment system or complement conventional insulation in a new building envelope.
Public value 90-93% - public product data 07.2026
System properties
One system, six practical functions.
Their importance varies by application. The final system follows from the product, substrate and required result.
Limits heat conduction
The tested coating achieved a thermal conductivity of 0.00079 W/(m·K).
Forms a continuous layer
The coating follows the prepared substrate without joints between insulation panels.
Remains flexible
The flexible layer works with the substrate and its dimensional changes.
Adapts to complex shapes
A liquid-applied system can cover surfaces that are difficult to enclose with rigid insulation.
Can be renewed
After its condition is assessed, the surface can be renewed with a further coat.
Surface atlas
Roof, facade, interior or installation?
Start with the surface. The product follows from its location, working conditions and substrate preparation.
01 / RoofBitum
Reduce heat gain and renew the existing roof covering.
For bituminous membranes, shingles and sheet metal roofs. At a reference site, readings showed 17-21°C on the coated area and 63°C on the uncoated area.
AAM Driveline measurement, 5 June 2023, air temperature 23°C Discuss your roof with an adviser
02 / FacadeTermo-Fasada
Improve thermal protection without changing the building form.
A thin layer for external walls, including buildings where increasing facade thickness is restricted.
Ask about Termo-Fasada
03 / InteriorTermo-Wnętrze
Reduce the cold-wall effect on walls and ceilings.
For application from inside the room. The product has a PZH hygiene certificate that also covers healthcare facilities.
Ask about Termo-Wnętrze
04 / IndustryTermo Stop
Reduce losses from pipes and hot surfaces.
A thermal insulation compound that follows installations, fittings and surfaces with complex geometry.
Explore industrial applicationsSubstrate preparation
Grunt Uniwersalny
A system component for preparing compatible substrates before the coating is applied.
Finishing layer
Tynk termoizolacyjny
An additional product for building envelopes that require a textured finish.
Coating or extensive refurbishment
A different scope of work, not a simplified substitute.
This comparison concerns how the upgrade is organised. The final layer build-up always follows from a technical assessment.
Extensive refurbishment
More intervention in the existing envelope
- Removal of existing layers
- A thicker building envelope
- Heavy dismantling work
- Waste and reinstatement work
- Longer disruption to building use
Coating system
More work with the existing surface
- Assessment and preparation of a stable substrate
- Application to the existing surface
- Preservation of envelope geometry
- Less dismantling work and waste
- Work sequence adapted to the building
On-site measurement
Two surfaces. One roof. The same moment.
On the roof of the AAM Driveline facility in Świdnica, thermal imaging compared an area coated with Bitum and an area without the coating.
5 June 2023 / air temperature 23°C / Testo 872s camera
Surface coated with Bitum17-21°C
Uncoated area63°C
These readings describe this specific measurement. They are not a universal temperature promise for every roof.
Research and documentation
Each type of evidence answers a different question.
Patent documentation describes the technology, the paper reports a tested coating parameter, and product documents define the scope of a specific product.
IzolPLUS technology
The coating technology is described in a European patent publication.
Open the patent documentThermal conductivity
The paper reports a value of 0.00079 W/(m·K) for the tested coating.
DOI 10.3390/en15176286Open the paperPZH, NRO classification and data sheets
Each document is assigned to the relevant product and application.
Browse the evidence libraryFrom assessment to application
We select the product and work scope for the surface.
The process is easy to follow but keeps the essential step: assessing the substrate before defining the system.
Conversation
Describe the building, substrate and problem.
System selection
We define the product, substrate preparation and material consumption.
Application
Straightforward work can be completed by your own team. Building-scale projects are handled by trained contractors.
Verification
If the project requires a final measurement, we agree its scope before work begins.
Pytania i odpowiedzi
Questions about IzolPLUS coatings
Odpowiedzi zachowują zakres właściwy dla konkretnej powierzchni, produktu i warunków zastosowania.
01Can a thin coating reduce heat transfer?+
IzolPLUS combines reflection of thermal radiation with low thermal conductivity. A value of 0.00079 W/(m·K) for the tested coating was reported in an Energies paper in 2022.
02How is material consumption calculated?+
Consumption depends on the product, substrate and required system. We specify it after assessing the surface.
03Which surfaces can be treated with IzolPLUS?+
The range includes bituminous, shingle and sheet metal roofs, facades, walls and ceilings, as well as hot installations. Final compatibility is confirmed for the specific substrate.
04When can the coating be applied?+
Conditions depend on the product, substrate condition and weather. We provide the requirements for the selected system.
05How is the coating renewed?+
After assessing the existing surface, the system can be renewed with another coat instead of removing the entire layer.
06How is IzolPLUS different from ordinary paint?+
IzolPLUS is a technical coating with documented thermal parameters. It is selected for the surface and function, not only for the colour of the finish.
Contact - homeowner